Yamaha PSR-S970 Musical Toy Instrument User Manual


 
96 PSR-S970/S770 Owner’s Manual
3 Use the TAB [E][F] buttons to call up the desired page.
For details about each page, refer to the Reference Manual on the website.
• VOL/VOICE ......Changes the Voice for each part and adjusts panning and vol-
ume for each part.
• FILTER..............Adjusts the Harmonic Content (resonance) and sound bright-
ness.
• TUNE ................Pitch-related settings (tuning, transpose, etc.).
• EFFECT............Selects the effect type and adjusts the depth for each part.
• EQ .....................Boosts/cuts the high band or low band for each part to correct
the tone or timbre of the sound.
• MEQ ..................Selects the master equalizer type applied to the entire sound
and edit the related parameters.
• CMP ..................This is the Master Compressor setting which determines the
dynamics of the overall sound.
4 Use the [A] – [J] buttons to select a parameter, then use the
[1 ] – [8 ] buttons to set the value for each part.
5 Save your Mixing Console settings.
NOTE
The MEQ and CMP settings are not
applied to audio playback or the met-
ronome sound.
NOTE
You can instantly set the same value
for the parameter to all of the parts, if
you simultaneously hold down one of
the [A] – [J] buttons and use the [1
] – [8 ] buttons (or the Data
dial).
To save the PANEL display settings:
Register them to Registration Memory (page 85).
To save the STYLE display settings:
Save them as Style data. If you want to recall the settings for future use, select the
Style file saved here.
1. Call up the operation display.
[FUNCTION] TAB [F] MENU 2 [A] STYLE CREATOR
2. Press the [EXIT] button to close the RECORD display.
3. Press the [I] (SAVE) button to call up the Style Selection display, then
save it (page 28).
To save the SONG display settings:
First register the edited settings as part of the Song data, then save the Song. If
you want to recall the settings for future use, select the Song file saved here.
1. Call up the operation display.
[FUNCTION] TAB [F] MENU 2 [B] SONG CREATOR
2. Use the TAB [E][F] buttons to select the SETUP tab.
3. Use the [8 ] (APPLY) buttons to actually apply the settings.
4. Press the [I] (SAVE) button to call up the Song Selection display, then
save it (page 28).
Advanced Features
Refer to the Reference Manual on the website, Chapter 9.
12psrs970_en_om.book Page 96 Friday, June 26, 2015 3:33 PM