Filter
Top Products
READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE
OF CHAIR. KEEP INSTRUCTIONS FOR FUTURE USE.
ASSEMBLING YOUR TRAVEL DINER CHAIR
1.Remove the black plastic protective caps from the ends
of the backrest bar. These black plastic caps are for packing
purpose only and should be discarded.
If the backrest bar (U – shaped) is not fitted, slide the arm
through the sleeve at the back of the seat cover until the
pins on the tube are exposed on either side of the sleeve.
2.Assess the position of each arm. For the correct position
of each arm you must have:
a.Round rubber stopper positioned at front.
b.Round lock release button on clamp must face the
outside of the chair.
c.Rubber paddle – grip positioned at top.
2