Filter
Top Products
3-10 Industio CI-134 Series User’s Manual
Windows 95/98
Windows 95/98 supports up to 128 serial ports, from COM1 to COM128. To fully
integrate the advanced features of Windows 95/98, multi-process and multi-thread,
pure 32-bit Windows 95/98 virtual device port drivers (VxD) compliant with
communication drivers (VCOMM) are developed for the
Industio CI-134 Series and
other MOXA multiport boards. The drivers conform to the Win32 COMM API
standard.
l To install the driver for the first time driver, please go directly to the section
“Installing Driver”.
l If you already have installed the driver and want to re-configure the board and
port, add more boards or delete boards, please refer to the section
“Configuring Board and Port”.
l To upgrade or remove driver, please go to the sections, “Updating Driver” and
“Removing Driver”.
Installing Driver
Up to 4 Industio CI-134 Series boards can be installed together as long as the I/O
addresses and IRQ number resources are sufficient and available in a system.
The following is the procedure for installing
Industio CI-134 Series for the first time
under Windows 95/98:
1. Run Setup95.exe in the driver diskette.
2. Click on [Next>] button in the “Welcome ...” message dialog box. And then click
on [
Next>] button in the “Ready ...” message dialog.
3. Click on [Finish] button in the “Complete ...” message dialog to enter the
configuration panel.
4. The “MOXA Configuration Panel” dialog will pop up for you to configure the
board and ports.