Filter
Top Products
3-14 Industio CI-134 Series User’s Manual
Note ! The latest configuration will not take effect unless the system restarts.
9. When system restarts, all the error conditions of the board will be popped up onto
the screen if any. Otherwise, everything should be fine.
If error message like “
CI-134 Series (CAP=0x0180, port 1=COM3): Board is
not found
” appears, refer to chapter, “Troubleshooting”, for solutions.
Note ! Once the board and the driver are installed and the driver restarts
successfully, you can start to develop applications with the
PComm
library (See “Serial Programming Tools” chapter) or the Microsoft
Win32 API. You can also execute any ready-made applications, such
as
PComm utility Terminal emulator (See “Serial Programming
Tools” chapter) or HyperTerminal to transmit/receive data, as well as
Remote Access Service to provide dial-up networking capabilities.
Configuring Board and Port
If you already have installed the driver and want to re-configure the Industio CI-134
Series board and ports, add more boards or delete boards under Windows 95/98, the
following is the procedure for you.
1. Click on the Taskbar [Start] button, then select [Programs] menu, then [MOXA
Utilities
] menu and then [MOXA Configuration Panel] icon.
2. The configuration panel will be popped up. Please see steps 4-7 in the previous
Section “Installing Driver” for more details.