Filter
Top Products
2. Turn off the computer; then disconnect the ac adapter and all cables
from the computer.
3. Close the computer display, and turn the computer over.
4. Remove the battery.
5. Unfasten the two screws 1 on the cover of the memory slot, and
remove the cover 2.
2
1
1
6. If the SO-DIMM is already installed in the memory slot, remove it to
make room for the new one by pressing out on the latches on both edges
of the socket at the same time. Be sure to save it for future use.
7. Find the notch on the contact edge side of the SO-DIMM.
Attention: To avoid damaging the SO-DIMM, do not touch its contact
edge.
Replacing memory
28 Lenovo 3000 V100 Service and Troubleshooting Guide