Filter
Top Products
1
© Copyright 2007 Printed
Before You Start
Your Land Pride Front Rack is exclusively designed for
your ST Treker. Please read these instructions and your
vehicle Operator’s Manual thoroughly before beginning.
Especially read information relating to safety concerns.
Also included in the Operator’s Manual is important
information on operation, adjustment, troubleshooting,
and maintenance for this attachment (some manual
sections do not apply to all accessories).
A separate Parts Manual for replacement parts can be
purchased from your dealer or available free of charge at
www.landpride.com. Have model and serial numbers
handy when placing an order.
Manual Part Numbers:
• Operator’s Manual (20 ST Series) . . . . . . . 700-504M
• Operator’s Manual (00 & 10 ST Series). . . 700-108M
• Parts Manual (20 ST Series) . . . . . . . . . . . 700-504P
• Parts Manual (10 ST Series) . . . . . . . . . . . 700-109P
• Parts Manual (00 NT/ST Series) . . . . . . . . 700-108P
Further Assistance
Your dealer wants you to be satisfied with your new Front
Rack. If for any reason you do not understand any part of
this manual or are not satisfied with the service received,
the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
!
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
General Information
These assembly instructions apply to the following
ST Front Rack Accessories listed below:
701-171A Series 20 ST Treker Front Rack Kit:
Mounts to the Heavy Duty Brush Guard
701-122A Series 00 & 10 ST Front Rack Kit:
Mounts to the Heavy Duty Brush Guard
701-053A Series 00 & 10 ST Front Rack Kit:
Mounts to the Standard Brush Guard
701-126A ST Front Rack Adapter Kit:
Attaches Front Rack to a Heavy Duty
Brush Guard
Tools required:
•
Safety glasses
• Work gloves
• Two 1/2" box end or open end wrenches
• Phillips screwdriver
Assembly Instructions
A detailed listing of parts for each accessory kit is
provided on page 5. Use the list for your particular
application as a checklist to inventory parts received.
Please contact your local Land Pride dealer for any
missing hardware.
Initial Preparations
Before servicing the vehicle the following procedure must
be met to secure the vehicle:
1. Park vehicle on a level surface. Don’t work under or
around a vehicle parked on an incline.
2. Make the following gear and park brake selections:
a. 10 & 20 ST Series Trekers:
• Set shift selector in Park.
b. 00 ST Series Trekers:
• Set shift selector in forward gear.
• Set park brake.
3. Turn ignition switch off and remove switch key.
4. Chock front and back of a wheel to prevent vehicle
from rolling.
5. Go to one of the installation kits listed below to
complete installation.
• For installation of Kit No. 701-171A, see page 2.
• For installation of Kit No. 701-122A, see page 3.
• For installation of Kit No. 701-053A, see page 4.
• For installation of Kit No. 701-126A,
see page 2 or page 3.
Treker 4200/4400 ST, 4210/4410 ST & 4220/4420 ST Models
ST Front Rack
Assembly Instructions
2/23/07
Manual No. 701-123M