Filter
Top Products
Quick Setup Guide
|
NS-DFLMR1
Macro Ring Flash
PACKAGE CONTENTS
• Macro ring ash
• 6 lens adapters (49mm, 52mm,
55mm, 58mm, 62mm, 67mm)
• Quick Setup Guide
FEATURES
• Compatible with all DSLR
cameras with a ash hot-shoe
• Can operate remotely with
PC sync cable (not included)
• 3.75" light ring with guide
number of 10m at ISO 100
• Ideal for close-up photos
• Five illumination power levels
• Xenon ash tube lighting
FEATURES
1
Ring Flash and mounting slot
Attaches to your camera lens.
2 Power switch Slide to turn on or o.
3 Charging indicator Brightly lit– The ring ash is ready to use.
Blinking every 1 second– Low battery.
Blinking every 3 seconds – In sleep mode.
O - When the ash is turned o.
4 Flash level indicators Light to indicate the ash power level
(1/16, 1/8, 1/4, 1/2 , or 1/1).
5 Battery compartment Insert 4 AA alkaline or Ni MH batteries
(not included)
6 Flash level buttons Press + or – to select the ash power level.
7 Test button Press to test your ash.
8 PC sync socket Connect a PC Sync cable (not included) to
trigger the ash from another device or to
locate the ash control unit away from the
camera.
9 External power pack terminal For use with optional external battery pack
module (not included).
10 Locking ring Secures the control unit to your camera.
11 Lens adapters Allows you to mount the ring ash on your
camera lens.
INSERTING THE BATTERIES
Note: Batteries are not included.
1 Slide the battery cover
down, then lift up to
open the battery
compartment.
2 Insert 4 AA alkaline or
NiMH Type batteries.
Make sure that the +
and – match what is
indicated in the
compartment.
3 Close the battery cover,
then slide it up until it
clicks into place.
# Item Description
2
3
1
5
9
7
8
10
6
4
11
NS-DFLMR1_14-0801_QSG_V1_ENG_Final.ai 1 8/19/2014 8:28:01 AM