Filter
Top Products
4
Read the entire Operator’s
Manual before using or
servicing the machine.
GB
Read, understand, and follow all
warnings and instructions in this
Operator’s Manual and on the
machine.
Always wear eye protection,
hearing protection, helmet, mask,
gloves, trousers and boots when
using the machine. A rst aid box
should always be on hand.
This product is in accordance with
applicable EC directives.
Key to symbols
Check that the ceiling is strong
enough. The ceiling should be
solid.
Make sure that the fork grips in
the inner pipe, tighten using 24
mm spanner.
Lock the nut using a 30 mm
spanner.
Check the lock nut on the L-handle.
Tighten until it becomes difcult to
turn and so that it can not change
due to vibration when horizontal
drilling.
The drilling machine must be suitable
and designed for the size of drill bit.
Max drill bit diameter 350 mm.
Direction of rotation
The drilling machine must be
suitable and designed for the size of
drill bit.
The drilling machine must conform
to applicable regulations, EU-
requirements as well as national
requirements.
See your instruction manual for
your drilling machine
Example of a suitable drilling
machine: Husqvarna DM 310