Filter
Top Products
38
39
4
3
From underneath, pull
buckle’s metal clip through
pad and shell.
Reinstall Harness
2
Thread the harness down
through slot on left side of
shell (1), across bottom of
shell (2) and up through
slot on right side (3).
Thread one latch plate
onto harness from back to
front (4).Thread the
harness retainer (5).Do
the same to the other
harness end. Make sure
the harness is not twisted.
Push harness ends through
upper slots in shell (6).
WARNING
!
Failure to reattach the harness correctly,
can result in serious injury or death.
1
2
3
4
5
6
Fit loops on harness ends
onto the splitter plate.
5
From the front of child
restraint push buckle’s
metal plate through pad
and shell. Make sure
buckle faces out.
WARNING
Failure to place buckle’s metal plate
completely through pad and shell can result
in serious injury or death to the child.
Pull up on buckle to make
sure buckle’s metal plate
stops against the shell.
!
1